Why Aren’t As Bad As You Think

Basic Guide to Finding Hidden Valves and Piping

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. If you use a plan to find the valves then you are sure that you are able to easily know where to start.